The electric motor driven Cable Pushers are used for installation of underground Insulated Power Cables. The caterpillar structure is good for gripping the big cable and protect the surface and core of power cable.

Cabling Caterpillar Pusher 0.5 TON.

Application: The electric motor driven units are used for installation of power or telecom cables. The flank caterpillars drive the cables forwards, which eliminates damage of insulation.  
The caterpillars of products are at the central horizontal position.

Applicable voltage: 380V AC

Features: 1. Electric Driven by two axles, the driven is even and low noise.

        2. The caterpillar is made in high strength neoprene, it cap protect the insulation of cable

well, and can be used for long time.

        3. The height roller can be adjustable for easy operation of machine.

        4. The length of cable in the cable drum is 70 meters.

        5. Each set of Cable Pusher include one subsidiary control box. If customer order more than 6 set of cable pusher, we will provide one Main Control Box free of charge.

Cabling Caterpillar Pusher 0.8 TON

Application: The electric motor driven units are used for installation of power or telecom cables. The flank caterpillars drive the cables forwards, which eliminates damage of insulation.  
The caterpillars of products are at the central horizontal position.

Applicable voltage: 380V AC

Features: 1. Electric Driven by two axles, the driven is even and low noise.

        2. The caterpillar is made in high strength neoprene, it cap protect the insulation of cable

well, and can be used for long time.

        3. The height roller can be adjustable for easy operation of machine.

        4. The length of cable in the cable drum is 70 meters.

        5. Each set of Cable Pusher include one subsidiary control box. If customer order more than 6 set of cable pusher, we will provide one Main Control Box free of charge.

1.      Technical Specifications of DJSSJ5B

2.      Structure of DJSSJ5B

With both sides of electric motor and caterpillar structure, the pushing force is on both sides of cable, and in horizontal position.

The machine can be connected by cable and sub control board in series connection structure, and controlled by Main control board for working together simuteneously.

3.      Main parts and Function of Parts.

      The cable pusher is composed of Electric motor, Reducer, Caterpillar, Clamp System,

Guide roller system, Steel Frame, Rocker Handle etc. (Please refer to drawing 1).

1)      Electric Motor

The machine is equipped with three phase electric motor as power source, there is switch on the pusher for controlling the rotation direction of electric motor. Also the electric plug for connection with sub control board and main control board.

2)      Reducer

The reducer is made of pure gear box, for high efficiency, stable power transfer and low noise. The electric motor is connected with reducer through elastic coupling, simple structure and stable working speed. The electric motor and reducer are installed on the same steel frame.

3)      Conveyer Caterpillar

The two caterpillars move in same speed, and push the cable forward with the clamp system. The caterpillar can be adjusted by the Rocker Handle No.8 for different size of cable. The surface of caterpillar is made of concave neoprene rubber, it has good friction rate, and protect the surface of cable well. The caterpillar can only move in one direction, the cable should be pushed in the direction according to the arrowhead sign on the machine.

4)      The guide roller system can prevent the cable moving out of the clamp system. The guide roller is made of nylon, which has good wear proof feature. The position of roller can be adjusted up and down, for different size of cable.

5)      The Clamp system is used for gripping the cable in pulling operation with guide screw structure. Rotate the handle clockwise, the caterpillar will grip the cable little by little. Because there is a spring structure in the guide screw system, the clamp can grip the cable smoothly and protect the cable well. Customer can observe the clamping force through the Copper Nut 3, when the cable is gripped, the Copper Nut is drawn back into the sleeve, the pushing force is 5 KN (0.5 ton). Normally during the operation, the gripping force of clamp should prevent the cable moving in the caterpillar.

6)      The Rocker handle is used for moving the clamp system.

7)      The steel frame is welded from H shape steel. Structure is simple and stable. There is rings on the corner of frame for easy transportation.

General Instructions

FOR THE SAFE OPERATION OF THIS EQUIPMENT:

1) All authorized operators must become familiar with the equipment and all operating and maintenance procedures, and be sure each day that the equipment is in safe operating condition including all guards and safety devices in place, before allowing it to be operated on that day.

2) In case of any problem arising in the operation of this equipment, it is essential that the problem be identified and corrected before continuing operation.

3) Equipment must be isolated when left unattended, to prevent unauthorized use. Misuse can result in personal injury and property damage.

4) OPERATING Safety Precautions.

a. Prior to starting work, make sure the equipments are grounded.

b. Ensure all personnel are clear of working equipments and keep good communication.

c. Observe strictly All regulations at the work site pertaining to the operation of this equipment.

d. Test that All protection and safety devices are operating properly.

Package

1. The equipment and tools will be loaded in plywood case.

2. It also can be packed in steel frame case or wooden case.

Shipment

1. The equipment and tools will be shipped in container or by air.

2. We will ship the products within one month normally after receiving the payment.

3. Stock is available for standard product.

Payment

1. We accept T/T and L/C.

2. Please send swift copy of T/T if you arrange payment by T/T

3. Please send us the L/C draft to us before issue L/C.

Why choose us:

1. High quality and competitive price

2. Leading and biggest manufacture for stringing equipment and tools in China.

3. We have 25 years of production experience, and more than 1000 customers in the country and abroad market. Our stringing equipment and tools have been sold to more than 40 countries.

4. Customer specially ordered products are available, such as live line OPGW installation equipment and tools.

4. Big stock condition for fast shipment.

5. Detailed pre-sales service and fast active after-sales service. Response within 12 hours after-sales service